HOBBYPARTS

Orbit Electronic

Orbit Jetronic AECU

HPOEAECU

Larger picture

Auto-start turbine controller for propane or kerosene start.

Developed especially for Wren MW54

The electronic turbine controller Orbit Jetronic AECU (Autostart Engine Control Unit) has been developed especially for MW54, KJ66/70mm and similar model jet turbines with a typical rotor speed of 30,000 up to max. 160,000 rpm. The desired parameters can be very easily programmed. On each start-up of the turbine, the control unit automatically calibrates the fuel pump to compensate for e.g. air pressure fluctuations or different fuel types. This guarantees a safe, maintenance-free operation.

Orbit Jetronic EDT

HPOEEDT

Larger picture

Programming and display unit for the Jetronic AECU turbine controller.

The Jetronic EDT (Engine Data Terminal) is a handy programming and display unit for the Jetronic AECU turbine controller with a two-line LCD display. It can either be detached after the engine has been started, or permanently mounted in the plane or, as it is both small and light weight. The Orbit EDT screen displays the exhaust gas temperature (EGT), the turbine rev speed (rpm), the actual throttle setting (GAS) and the NiCd battery voltage.

Orbit Jetronic Micro EDT

HPOEMEDT

Larger picture

Onboard micro programming and display unit for the AECU turbine controller.

The Orbit Turbojet micro EDT (Engine Data Terminal) is a handy programming and display unit for the AECU turbine controller with a two-line LCD display. It can either be detached after the engine has been started, or permanently mounted in the plane or, as it is both small and light weight. The Orbit EDT screen displays the exhaust gas temperature (EGT), the turbine rev speed (rpm), the actual throttle setting (GAS) and the NiCd battery voltage.

Orbit Jetronic PC-Interface

HPOEPCINT

Larger picture

Connects the Jetronic to a Windows PC.

The PC-Interface connects the turbine controller Orbit Jetronic to a Windows PC via the serial port (COM / USB Adapter). The included JETLOG software allows the convenient logging and evaluation of all measured data during your turbine tests. The latest version of the JETLOG software can be downloaded free of charge from this page.

Download the JETLOG software now (420 KB)

Orbit LED status indicator

HPOELEDST

Larger picture

Status display (red/green) for Turbojet AECU

This optical status indicator is connected to the turbine controller Orbit Turbojet AECU. It can be mounted either on the fuselage or in the cockpit of your model aircraft and informs you about the status of your turbine even from a distance with its two super-bright red and green LEDs.

Kerosene burner

HPOEKB

Larger picture

Kerosine autostart burner for Turbojet AECU

The kerosene autostart burner unit is a replacement for the glowplug. A high power heating element starts the engine direct with kerosene and elimantes the need of propane gas. The specification is the high power burner unit including the heating element and all adapter accessories like wire harness, teflon tubing, fittings etc. Spare glow pin 12V/20A

Turbine battery Lithium 1100mAh

HPOEB1100

Larger picture

Turbine battery Lithium 3s 11.1 V / 1100 mAh

Lithium turbine battery 3s 11.1V / 1100mAh, formated and tested, complete with G2 connector for kerosene start with small engines P60, MW-54 etc. Good for 3 flights with kerosene start.

Turbine battery Lithium 2200 mAh

HPOEB2200

Larger picture

Turbine battery Lithium 3s 11.1 V / 2200 mAh

Lithium turbine battery 3s 11.1V / 2200mAh, formated and tested, complete with G2 connector for kerosene start with small engines KJ66, P-80, TJ-74 etc. Good for 5 flights with kerosene start.

Kero Start Upgrade Kit for Wren MW54

HPOEWRENKEROKIT

Larger picture

NOTE: Recommended for engines out of warranty period only.

Kit includes all parts required to convert your Wren MW54 to Kero start, using Orbit Jetronic system.

Video of Wren MW54 Kero Start:-

Click here for video of startup & shutdown 4 meg version
Click here for video of startup & shutdown 18 meg version

Or Right click and choose save as to a location of your choosing.
PLEASE NOTE THESE ARE LARGE FILES SO WILL TAKE A WHILE TO DOWNLOAD